(sometimes we provide two download links because it may happen that the main server / link is overloaded or slow or non responding - the files are identical. Just choose one, save to the Desktop, double click to install)
Disclaimer: to our best knowledge this download comes from a website that is
safe (the last time we checked it, it was), but for your peace of mind (and better safe than sorry) we advise you to run an
antivirus on the downloaded file. Do not rely on MSWindows, Internet explorer, or on the electronic signature: a unsigned download is usually as safe as a signed one, signed just means the author paid Microsoft or Verisign for a stamp, it does not mean verified. Please kindly
report us problems with detail (click here to report), if any.
emBoot's MBA for Realtek is client-based firmware that allows a client PC to do a "network boot” using the NIC or LAN-On-Motherboard. MBA for Realtek is fully compliant with the Intel Wired for Management PXE spec.
* Simple means of desktop OS deployment/disaster recovery
* No need to change PC or NIC-specific settings
* No need to enable bootROM on the NIC
* No need to make network boot the highest pripriority boot device within the BIOS
(
Firmware that "network boots” PCs using Realtek NICs or LAN-on-motherboard)
emBoot's MBA for Realtek is client-based firmware that allows a client PC to do a "network boot” using the NIC or LAN-On-Motherboard. MBA for Realtek is fully compliant with the Intel Wired for Management PXE spec.
* Simple means of desktop OS deployment/disaster recovery
* No need to change PC or NIC-specific settings
* No need to enable bootROM on the NIC
* No need to make network boot the highest pripriority boot device within the BIOS
* Ideal for quickly installing guest operating systems using WfM-enabled desktop tools such as emBoot NBT or Altiris RDP
* Bootable floppy functions as a PXE Boot ROM
* Comes with MBADISK.EXE to build and configure bootable floppy "bootROMs"
* MBAoD for Realtek supports additional boot protocols and individual options:
- Remote Program Load (RPL)
- Netware NCP/IPX
- Traditional” BOOTP and DHCP
* Supports SMC 1211TX Accton EN1209D-TX5, Allied Telesyn AT-2500, Compaq PCI 10/100, AcerOpen AON-325, Surecom EP-320X-R, plus others from: D-Link, Cameo, Edimax, Ovislink, CNet
* Compatibility: 8100B, 8139, 8139C, 8139C+, 8139D based chipsets / ASICs from Realtek
OS Deployment program, network booting program, boot agent program, network boot program, remote boot program, preboot program
Click here to start the download